[gphoto-devel] iphone 10.2.1

[hobo]

Apple iPhone 5 (PTP mode) usb:008,002
***@hobo-p7-1534:~$ gphoto2 --summary


*** Error ***
An error occurred in the io-library ('Could not claim the USB device'):
Could not claim interface 0 (Device or resource busy). Make sure no
other program (gvfs-gphoto2-volume-monitor) or kernel module (such as
sdc2xx, stv680, spca50x) is using the device and you have read/write
access to the device.
*** Error (-53: 'Could not claim the USB device') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-***@lists.sourceforge.net>, please run
gphoto2 as follows:

[Marcus Meissner]

Hi,

Thanks for the report!

Your device will probably already show up in Nautilus.

Ciao, Marcus

Post by hobo
Apple iPhone 5 (PTP mode) usb:008,002
*** Error ***
Could not claim interface 0 (Device or resource busy). Make sure no
other program (gvfs-gphoto2-volume-monitor) or kernel module (such as
sdc2xx, stv680, spca50x) is using the device and you have read/write
access to the device.
*** Error (-53: 'Could not claim the USB device') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Gphoto-devel mailing list
https://lists.sourceforge.net/lists/listinfo/gphoto-devel